Civic L4-1.8L CNG (2008)
9. Remove the shift solenoid harness connector (E), and replace it.
10. Install a new O-ring (F) on a new shift solenoid harness connector, and install the connector in the transmission housing.
11. Connect WHT harnesses and ORN harness connector to shift solenoid valve B. ATF temperature sensor is assembled in the connector with WHT
harnesses.
12. Connect the shift solenoid harness connectors:
^
BLU wire to shift solenoid valve A.
^
GRN wire to shift solenoid valve C.
^
YEL wire to shift solenoid valve D.
13. Install the shift solenoid valve cover, the dowel pins, a new gasket, and the harness clamp bracket.
14. Check the connector for rust, dirt, or oil, then connect the connector securely.
15. Refill the transmission with ATF.
16. Install the splash shield.