honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Cable Adjustment|Page 6174 > < Mode Control Switch Test|Page 6171
Page 1
background image

Heater Control Panel: Adjustments
Air Mix Control Cable Adjustment

Air Mix Cable Adjustment

1.  Disconnect the air mix cable.
2.  Turn the cable arm to the stopper and connect the end of the cable to the arm.
3.  Gently slide the cable outer housing back from the end enough to take up any slack in the cable, but not enough to make the temperature control

lever move, then snap the cable housing into the clamp.

NOTE: Air mix cable should be adjusted if the heater valve cable has been disconnected.

Air Mix Control Cable Adjustment|Page 6174 > < Mode Control Switch Test|Page 6171