Civic L4-1493cc 1.5L SOHC (8 valve) (1992)
/Page-270002.png)
Fig. 9. Bleeding High Pressure Fluid At Maintenance Bleeder. 1992 Accord & Prelude
5.
On Accord and Prelude models, bleed high pressure fluid from maintenance bleeder with special bleeder wrench tool No. 07HAA-SG00101 or
equivalent, Fig. 9.
Fig. 76 Bleeding High Pressure Fluid At Maintenance Bleeder.
6.
On Civic models, bleed high pressure fluid from maintenance bleeder with special bleeder wrench tool No. 07HAA-SG00101 or equivalent, Fig.
76.
7.
Refill modulator reservoir to MAX level and install reservoir cap.
8.
Turn mode selector switch of checker to 2.
9.
While depressing brake pedal firmly, push start test switch to operate modulator. There should be kickback on brake pedal. If there is no kickback,
repeat steps 4 through 7.
10.
Turn mode selector switch of checker to 3, 4 and 5. Perform step 7 for each test mode position.
11.
Refill modulator reservoir to MAX level and install reservoir cap. Disconnect ALB checker before driving car. A collision can result from a
reduction, or complete loss of braking ability.
With Anti-Lock Brakes (Using ALB Checker)
CAUTION:
^
Do not spill brake fluid on the car; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
