honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Door Side Sill Seal Replacement|Page 7539 > < Front Door Side Sill Seal Replacement|Page 7537
Page 2
background image

1. At the A-pillar, remove the door checker mounting bolt (A).
2. Detach the clips (B, C, D), then remove the door weatherstrip (E).
3. Install the weatherstrip in the reverse order of removal, and note these items:

-

Replace any damaged clips.

-

Make sure the weatherstrip is installed in the holder (F) securely.

-

Apply liquid thread lock to the door checker mounting bolt before installation.

-

Check for water leaks.

-

Test-drive and check for wind noise.

Front Door Side Sill Seal Replacement|Page 7539 > < Front Door Side Sill Seal Replacement|Page 7537