Civic L4-1668cc 1.7L SOHC MFI (2003)
-
Mix the body filler and hardener quickly.
-
Apply the body filler in several thin coats, without air bubbles.
-
Do not try to cover the surface with one heavy coat.
-
Apply the body filler over the damaged area with a putty knife using light pressure.
-
After applying the body filler, allow 5-6 minutes of normal drying time, then force dry it with infrared lamps or other industrial dryer at 122
degrees F (50 degrees C) - 140 degrees F (60 degrees C).
NOTE: Follow the body filler manufacturer's instructions for drying time.
2. Polishing
The body filler is dry when a white mark appears when the surface is scratched with your finger nail.
1. Throughly sand the body filler surface.
Use the double action sander and #80-#120 disc paper.
2. Sand the surface evenly, particularly the area that was filled.
Use the flexible block and #120-#180 sandpaper.