Civic L4-1668cc 1.7L SOHC MFI (2003)
Wheel Cylinder: Service and Repair
Rear Wheel Cylinder Replacement
NOTE:
^
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water. To
prevent spills, cover the hose joints with rags or shop towels.
^
Use only a genuine Honda wheel cylinder special bolt.
1. Remove the brake shoes.
2. Disconnect the brake line (A) from the wheel cylinder (B).
3. Remove the bolt (C) and the wheel cylinder from the backing plate.
4. Apply Three Bond 1109G sealant or equivalent (E) between the wheel cylinder (B) and backing plate (D), and install the wheel cylinder.
5. Install the removed parts in the reverse order of removal.
6. Bleed the brake system.
7. Check for leaks at the line joint and bleed screw, and retighten if necessary.
