Civic L4-1668cc 1.7L SOHC MFI (2003)
Crankshaft Main Bearing Seal: Service and Repair
Installation - In Car
Special Tools Required
^
Driver 07749-0010000
^
Driver attachment 07948-SB00101 or 07VAD-P84010A
1. Dry the crankshaft oil seal housing.
2. Apply a light coat of grease to the crankshaft and to the lip of the seal.
3. Using the special tools, drive in the crankshaft oil seal until the driver bottoms against the engine block end cover. When the seal is in place, clean
any excess grease off the crankshaft and check that the oil seal lip is not distorted.