Civic L4-1668cc 1.7L SOHC MFI (2003)
Clutch Disc: Service and Repair
Release Bearing Replacement
Clutch Replacement
Special Tools Required
^
Clutch alignment shaft 07LAF-PT00110
^
Clutch alignment disc 07JAF-PM7011A
^
Remover handle 07936-3710100
^
Ring gear holder 07LAB-PV00100 or 07924-PD20003
^
Attachment, 57 x 40 mm 07746-0010200
^
Driver 07749-0010000
Release Bearing Replacement
1. Remove the release fork boot (A) from the clutch housing (B).
2. Remove the release fork (C) from the clutch housing (B) by squeezing the release fork set spring (D) with pliers. Remove the release bearing (E).
3. Check the release bearing for play by spinning it by hand. If there is excessive play, replace the release bearing with a new one.
NOTE: The release bearing is packed with grease. Do not wash it in solvent.