Civic L4-1668cc 1.7L SOHC MFI (2003)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Removal
NOTE: Do not spill brake fluid on the vehicle; it may damage the paint, if brake fluid does contact the paint, wash it off immediately with water.
1. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
2. If the master cylinder is equipped with the retaining clip holder (A) remove it. Remove the retaining clip
3. Disconnect the clutch line (C) and reservoir hose (D). Plug the end of the clutch line and reservoir hose with a shop towel to prevent brake fluid
from coming out.
4. Pry out the lock pin (A), and pull the pedal pin (B) out of the yoke. Remove the nuts (C).
5. Remove the clutch master cylinder.