Civic L4-1668cc 1.7L SOHC MFI (2003)
6. Remove the O-ring (A) and the clutch master cylinder seal (B) from the master cylinder (C).
Clutch Master Cylinder Installation
NOTE: Do not spill brake fluid on the vehicle, it may damage the paint, if brake fluid does contact the paint, wash it off immediately with water.
1. Fit to the clutch master cylinder (A) a new O-ring (B) and a clutch master cylinder seal (C).
2. Remove the clutch line (A) from the clutch hose clip (B) (2 places).
3. Fit to the master cylinder (A) the reservoir hose (B), the clutch line (C) and a new retaining clip (D). If the master cylinder was equipped with a
retaining clip holder (E), reinstall it on the master cylinder.
