Civic Coupe L4-1595cc 1.6L DOHC (VTEC) MFI (1999)
_mfi/Page-1909001.png)
Heater Control Valve Cable: Adjustments
1. From under the hood, disconnect the heater valve cable from the heater valve.
2. From under the dash, disconnect air mix control cable housing from the cable housing from the cable clamp.
3. Set the temperature control lever to MAX. COOL.
4. With the air mix control cable attached to the air mix control arm, gently pull on the outer cable housing to fully close the door and to remove any
slack in the cable. Don't pull to hard, or the temperature control lever will move.
5. Hold the air mix control arm against the stop, then snap the air mix control cable housing into the cable clamp.
6. From under the hood, move the heater valve arm to the fully closed position, then attach the heater valve cable to the heater valve arm.
