honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3992 > < Diagram Information and Instructions|Page 3990
Page 1
background image

Fuel Injector: Service and Repair

Replacement

WARNING:  Do not smoke when working on the fuel system. Keep open flames away from your work area.

1. Relieve the fuel pressure.
2. Disconnect the connectors from the fuel injectors.
3. Disconnect the vacuum hoses from the fuel pressure regulator. Place a shop towel over the fuel return hose, then disconnect it from the fuel

pressure regulator. Disconnect the vacuum hoses and 2P connector from the EVAP purge control solenoid valve.

4. Remove the retainer nuts on the fuel rail.
5. Disconnect the fuel rail.
6. Remove the fuel injectors from the intake manifold.

1.6L SOHC VTEC-E, 1.6L SOHC VTEC

Diagram Information and Instructions|Page 3992 > < Diagram Information and Instructions|Page 3990