honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Keyless Entry Module > < Diagram Information and Instructions|Page 42
Page 2
background image

Intermittent Wiper System

4. Inspect the connector and socket terminals to be sure they are all making good contact.

-

If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

-

If the terminals look OK, make the following input tests at the connector and the fuse/relay box socket.
-

If any test indicates a problem, find and correct the cause, then recheck the system.

-

If all the input tests prove OK, the control unit must be faulty; replace it.

Keyless Entry Module > < Diagram Information and Instructions|Page 42