honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Relays and Modules - Restraint Systems > < Diagram Information and Instructions|Page 445
Page 2
background image

-

There should be continuity.

6. Check for continuity on the YEL/GRN wire to body ground.

-

There should be no continuity.

7. Check for continuity on the BLU1 wire between the test tachometer connector and the ICM.

-

There should be continuity.

8. Check for continuity on the BLU1 wire to body ground. 

-

There should be no continuity.

9. If all the tests are normal, replace the ICM.

Relays and Modules - Restraint Systems > < Diagram Information and Instructions|Page 445