Civic CVCC L4-1335cc 1300 EJ1 (1983)
Camshaft Gear/Sprocket: Service and Repair
1.
If necessary, loosen alternator and remove alternator drive belt.
2.
Remove valve cover.
3.
Remove upper timing belt cover.
Timing Marks
4.
Rotate crankshaft until No. 1 cylinder is at TDC (top dead center) compression stroke, then align camshaft sprocket timing marks as shown.
Crankshaft may be rotated with engine installed in vehicle using a socket wrench inserted through access hole in the front of left fender well.
