honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fuel Pump Cut-Off Relay <--> [Fuel Pump Relay] > < Fuel Injected Engine|Page 1235
Page 2
background image

4. Remove pressure gauge and hold a graduated container under the hose.
5. Turn ignition ON, measure amount of full flow for 60 seconds, then turn ignition OFF. Fuel flow should be more than 480cc (17 oz.) in 60

seconds with battery voltage at 10 volts minimum.

a. If fuel flow is 480cc (17 oz.) or more in 60 seconds, reconnect cut-off relay and fuel hose.
b. If fuel flow is less than 480cc (17 oz.) replace the fuel pump and re-test.

NOTE: Check for a clogged fuel filter and/or fuel line before replacing pump.

                    

Fuel Pump Cut-Off Relay <--> [Fuel Pump Relay] > < Fuel Injected Engine|Page 1235