honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ignition System > < Diagram Information and Instructions|Page 1336
Page 1
background image

Throttle Cable/Linkage: Adjustments

Fig. 6 Throttle cable adjustment

1.

Check cable for freedom of motion and correct as necessary.

2.

Check cable for free play at throttle link. Proper cable deflection is 3/16-3/8 inch (4-10 mm), Fig. 6.

3.

If deflection is not within specifications, turn adjusting nut until cable has no deflection.

4.

Loosen adjusting nut until cable deflects within specifications, then tighten locknut.

5.

After adjusting the throttle cable, have someone press down on the accelerator pedal inside the car while checking for full throttle condition at the 
carburetor.

6.

Readjust as necessary, staying within deflection specifications.

Ignition System > < Diagram Information and Instructions|Page 1336