honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ignition - Hard Start, Stall After Start, Plug Fouling|Page 1294 > < Ignition - Hard Start, Stall After Start, Plug Fouling|Page 1292
Page 5
background image

Hose Assembly (85 CRX)

3.

Install the two hose assemblies as shown.

4.

Make sure no vacuum lines are kinked, pinched, or disconnected, then reinstall the air cleaner.

5.

Apply the new hose routing label to the underside of the hood below the main hose routing label.

6.

Apply the spark plug label to the timing belt cover (next to the existing label on CRXs; on top of the existing label on other Civics).

7.

Correct the spark plug listings in your Civic Service Manuals to show only NGK: BUR4EB-11 or ND: W14KR-S11:

^

In the '84 Manual, on pages 3-10 and 25-31, cross out the original plugs and write-in the new type

^

In the '85 Manual, on pages 3-8 and 25-29, the new type is already listed; just cross out all the others.

Ignition - Hard Start, Stall After Start, Plug Fouling|Page 1294 > < Ignition - Hard Start, Stall After Start, Plug Fouling|Page 1292