Civic CVCC L4-1488cc 1500 EM1 (1982)
Stabilizer Bushing: All Technical Service Bulletins
Suspension - Clunk Noise
Model
Applicable To
File Under
Bulletin No.
83-003
'80-'83
ALL
SUSPENSION
Issue Date
CIVIC
MARCH 83
Suspension
Civic Suspension ClunkPROBLEM
Dry stabilizer bar bushings can cause a "clunk" when the car first moves forward or backward.
CORRECTIVE ACTION
1.
Remove the stabilizer bar.
2.
Remove and replace the 4 stabilizer bushings "B". Before installation, generously lubricate the new "B" bushings with a heavy consistency silicone
grease, such as Dow Corning 111, or equivalent.
3.
Make sure the 2 stabilizer bushings "A" are in good condition, then lube generously and reinstall along with the stabilizer bar.
NOTE:
For your convenience, you can get the name of a local supplier of Dow Corning 111 by calling: 800-248-2345.
PARTS:
Stabilizer bushing "B" (4): H/C 0933929 P/N 51396-SA0-004
Self locking nut (2):
H/C 0558999 P/N 90212-634-000
WARRANTY CLAIM INFORMATION Use operation number 51305 with a total time of 0.7 hour. On cars beyond 12/12, this
improvement/ modification, like all repairs, is eligible for goodwill consideration by your District Service Manager. You must request
the consideration and get the DSM's decision before starting work.