Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
10. Apply grease to the points indicated by the arrow in the following drawing:
NOTE: Use the pad grease included in the pad set or Molykote M77 grease, and apply a thin coat of grease evenly to the designated points.
-
Piston end and inner pad contact surface
-
Pad and caliper bracket contact surface
-
Outer pad shim and outer pad contact surface
-
Outer pad shim and caliper body contact surface
11. Install the brake pads and outer pad shim on the caliper bracket. Install the inner pad with its wear indicator facing downward.
WARNING:
-
When reusing the pads, always reinstall the brake pads in their original positions to prevent loss of braking efficiency.
-
Contaminated brake discs or pads reduce stopping ability. Keep grease off the discs and pads.
12. Rotate the caliper piston clockwise into the cylinder, then align the cutout in the piston with the tab on the inner pad by turning the piston back.
CAUTION: Lubricate the boot with rubber grease to avoid twisting the piston boot. If the piston boot is twisted, back it out so it sits properly.
13. Install the brake hose clamp on the trailing arm.
14. Install and tighten the caliper mounting bolts.
