Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
NOTE: Check that the circlip is seated in the groove properly.
13. Coat a new piston seal with recommended silicone grease in the caliper seal set, and install it in the caliper.
14. Apply recommended rubber grease in the caliper seal set to the sealing lips and inside of a new piston boot, and install it in the caliper.
15. Coat the outside of the piston with brake fluid, and install it onto the adjusting bolt while rotating it clockwise with the tool.
CAUTION: Avoid damaging the piston and piston boot.
16. Install the pad spring onto the caliper.
17. Apply the recommended pin grease in the caliper seal set to the sliding surface of the pins and inside of the new pin boots.
