Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
Indicator Input Test
1. Remove the gauge assembly from the dashboard, and disconnect the 14P connector from the gauge assembly.
2. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, make the following input tests at the 14P connector.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, but the indicator is faulty, replace the printed circuit board.
