honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Lighting - Turn Signal Does Not Cancel.|Page 8971 > < Lighting - Turn Signal Does Not Cancel.|Page 8969
Page 5
background image

15.

Carefully reinstall the cable reel on the steering column with the original screws. Then reconnect the 3P connector to the cable reel sub-harness
and the 2P connector to the SRS main harness, and reinstall the connectors in their holders.

16.

Reinstall the steering column covers with the original screws.

17.

Center the cable reel by first rotating it clockwise until it stops and then rotating it counterclockwise about 2-1/2 turns until the arrow on the label
points straight up.

18.

Reinstall the steering wheel. Then reconnect the horn switch connector and the cruise control set/resume switch connector (if equipped). Route the
wires in their clips on the steering wheel.

Lighting - Turn Signal Does Not Cancel.|Page 8971 > < Lighting - Turn Signal Does Not Cancel.|Page 8969