honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

A/T - Harsh Shifts/Stays in 1st Gear/MIL ON/DTC's Set|Page 4375 > < A/T - Harsh Shifts/Stays in 1st Gear/MIL ON/DTC's Set|Page 4373
Page 3
background image

12.

Disconnect the linear solenoid electrical connector. Remove the mounting bolts, then remove the linear solenoid.

13.

Inspect the linear solenoid mounting surface on the transmission. Remove any contamination.

14.

Install the new linear solenoid. Reconnect the electrical connector.

15.

Use the PGM Tester to erase any DTCs in the powertrain control module (PCM).

*16. Test-drive the vehicle to check the shift feel. If it still shifts harshly, install a remanufactured transmission.*

DISCLAIMER

A/T - Harsh Shifts/Stays in 1st Gear/MIL ON/DTC's Set|Page 4375 > < A/T - Harsh Shifts/Stays in 1st Gear/MIL ON/DTC's Set|Page 4373