honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Driver Airbag Replacement|Page 7121 > < Driver Airbag Replacement|Page 7119
Page 2
background image

-

Remove the three mounting nuts from the bracket, then remove the harness clip.

-

Lift the front passenger's airbag out of the dashboard by covering the lid and dashboard with a cloth, and prying carefully with a flat-tip
screwdriver.

NOTE:  The lid of the airbag has pawls on its side which attach it to the dashboard.

CAUTION:   Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.

4. Install the new airbag(s):

-

Place the front passenger's airbag into the dashboard.

-

Tighten the front passenger's airbag mounting nuts

5. Reconnect the airbag connector(s). 

Driver Airbag Replacement|Page 7121 > < Driver Airbag Replacement|Page 7119