honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Turn Signal Switch > < Diagram Information and Instructions|Page 750
Page 1
background image

Headlamp Switch: Testing and Inspection

1. Remove the driver's dashboard lower cover and steering column covers.
2. Disconnect the 4P and 7P connectors from the switch.

3. Inspect the connector and socket terminals to be sure they are all making good contact.

-

If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.

-

If the terminals look OK, check for continuity between them in each switch position according to the tables. If there is no continuity between
any of them, check for continuity in the switch harness.

If there is continuity in the switch harness, replace the combination light switch. If there is no continuity in the switch harness, replace it.

Headlight/Dimmer/Passing Switch:

Turn Signal Switch:

Turn Signal Switch > < Diagram Information and Instructions|Page 750