Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
2. Set the selected 32 mm shims on the bearing surface of the gearbox housing.
3. Coat the new O-ring with grease, and carefully fit it on the valve housing.
4. Apply grease to the needle bearing in the gearbox housing.
5. Install the valve body unit on the gearbox housing by engaging the gears.
NOTE: Note the valve body unit installation position (direction of line connection).
6. Tighten the flange bolts to the specified torque.
7. Install the cylinder lines A and B.
8. Before installing the gearbox, slide the rack ail the way to right.
9. Install the mounting cushion on the steering gearbox.
10. Install the pinion shaft grommet, then insert the pinion shaft up through the bulkhead.
NOTE: Align the notch in the pinion shaft grommet with the tab on the valve housing.
