Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
16. Remove the stiffener plate.
NOTE: Some stiffener plate attaching bolts are also used as gearbox mounting bolts. The gearbox will tilt to side when these bolts are removed.
17. Remove the mounting brackets.
18. Pull the steering gearbox all the way down to clear the pinion shaft from the bulkhead, then remove the pinion shaft grommet.
19. Move the steering gearbox to right so the left rack end clears the rear beam, then tilt the left side down to remove it from the vehicle.
CAUTION: Be careful not to bend or damage the feed line and cylinder lines when removing the gearbox.
Steering Gear Disassembly
TOOL REQUIRED
-
07NAD-SR3020A Cylinder End Seal Remover Attachment
-
07GAF-PH70100 Pilot Collar
NOTE:
-
Before disassemble the gearbox, wash it off with solvent and a brush.
-
Do not dip seals and O-rings in solvent.
1. Remove the steering gearbox.
