Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
3. Remove the boot bands and tie-rod clips. Pull the boots away from the ends of the gearbox.
4. Hold the steering rack with one wrench, and unscrew the rack end with another wrench.
CAUTION: Be careful not to damage the rack surface with the wrench.
5. Push the right end of the rack back into the cylinder housing so the smooth surface that rides against the seal won't be damaged.
6. Loosen the locknut, and remove the rack guide screw.
7. Remove the disc washer, spring and rack guide from the gear housing.
8. Remove the pinion dust seal and the 35 mm snap ring.
9. Hold the pinion shaft with a vise securely. Remove the pinion by tapping evenly around the flanged section of the gearbox with a plastic hammer.
