honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Lock Up Control Solenoid Valves <--> [Torque Converter Clutch Solenoid, A/T] > < Alternative View|Page 4558
Page 1
background image

Throttle Valve Solenoid: Service and Repair

1. Remove the mounting bolts and the linear solenoid assembly.
2. Clean the mounting surface and fluid passage of the linear solenoid assembly and transmission housing.
3. Install a new linear solenoid assembly with a new gasket.

NOTE:  Do not pinch the gasket when installing the linear solenoid; make sure that the gasket is installed properly in the mounting groove of the
linear solenoid.

4. Check the linear solenoid connector for rust, dirt or oil, and connect it securely.

Lock Up Control Solenoid Valves <--> [Torque Converter Clutch Solenoid, A/T] > < Alternative View|Page 4558