honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Valve Body, A/T|Removal|Page 4971 > < Valve Body, A/T|Removal
Page 2
background image

13. Clean the inlet opening of the ATF strainer thoroughly with compressed air, then check that it is in good condition, and the inlet opening is not

clogged.

14. Test the filter by pouring clean ATF fluid through the inlet opening. Replace the ATF strainer if it is clogged or damaged.

NOTE:  The ATF strainer can be reused if it is not clogged.

Valve Body, A/T|Removal|Page 4971 > < Valve Body, A/T|Removal