Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
2. Raise the front of vehicle, and support it with safety stands in the proper locations.
3. Remove the wheel nuts and wheel.
4. Raise the locking tab on the spindle nut, then remove the nut.
5. Remove the brake hose mounting bolts.
6. Remove the caliper mounting bolts and hang the caliper assembly to one side.
CAUTION: To prevent accidental damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper from the
undercarriage.
7. Remove the 6 mm brake disc retaining screws.
8. Screw two 8 x 1.25 mm bolts into the disc to push it away from the wheel hub.
NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.
