honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Quarter Glass|Page 9237 > < Quarter Glass|Page 9235
Page 4
background image

6. If the old quarter glass is to be reinstalled (and the clip on the rear edge is broken off), apply a light coat of primer (3M C-100, or equivalent), then

apply butyl tape to the quarter glass, as shown, and seal the body hole with piece of urethane tape.

NOTE:
-

Be careful not to touch the quarter glass where adhesive will be applied.

-

Do not peel the separator off the butyl tape.

Quarter Glass|Page 9237 > < Quarter Glass|Page 9235