Civic CX Hatchback L4-1590cc 1.6L SOHC MFI (1997)
9.
Inspect the glass run channel:
^
If the run channel is not sitting in the window channels properly, reinstall it.
^
If the run channel is damaged, replace it. Refer to section 20 of the appropriate service manual.
^
If the run channel is sitting in the window channels properly, go to step 10.
NOTE: If the run channel is sitting in the window channels properly and the window regulator was not replaced, disregard this service bulletin
and follow normal troubleshooting procedures.
10.
Reinstall the glass in the door, but do not tighten the glass mounting bolts. Reconnect the power window motor connector, and temporarily
reconnect the window switch (if applicable). Raise the window about 100 mm (4.0 in.) from the fully lowered position.
