Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
7.
Remove both rear seat belts from the rear seat belt guides.
8.
Remove the shelf from the vehicle.
*9.
Remove the piece of foam from the back edge of the shelf under the high-mount brake light.
10.
Use 3M adhesive remover to remove any residual adhesive from the shelf.*
*11. Cut three 20 x 100 mm pieces of EPT sealer 5T, and apply them to the bottom of the shelf as shown.*
12.
Reinstall the shelf, and line up its left and right edges with the quarter trim panels. Gently fold down the side trim panels to clear the shelf.
13.
Reinstall both seat belts into their guides, making sure they are not twisted or kinked.
