honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Rear Shelf: > < Rear Hat Shelf - Rattle/Buzzing Noise|Page 8010
Page 4
background image

14.

Using the palm of your hand, strike the back of the high-mount brake light to seat two of the shelf clips.

15.

Push down on the rear shelf at the other clip locations to set the remaining clips.

16.

Push the shelf edge onto the body flange.

17.

Reinstall the side trim panels and the lock cylinder trim, and reconnect the high-mount brake light connector.

18.

Test-drive the vehicle over rough roads to verify the noise is gone.

Disclaimer

All Technical Service Bulletins for Rear Shelf: > < Rear Hat Shelf - Rattle/Buzzing Noise|Page 8010