Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
8. Check the brake disc for damage and cracks.
9. Install the pad retainers.
10. Apply grease to the points indicated by the arrows in the following illustration:
NOTE: Use the pad grease included in the pad set or Molykote M77 grease, and apply a thin coat of grease evenly to the designated points.
-
Piston end and inner pad contact surface
-
Pad and caliper bracket contact surface
-
Outer pad and caliper body contact surface
-
Outer pad shim and outer pad contact surface
-
Outer pad shim and caliper body contact surface
11. Install the brake pads and pad shim correctly.
WARNING:
-
When reusing the pads, always reinstall the brake pads in their original positions to prevent loss of braking efficiency.
-
Contaminated brake discs or pads reduce stopping ability. Keep grease off the discs and pads.
NOTE: Install the pad with the wear indicator on the inside.
12. Push in the piston so that the caliper will fit over the pads. Make sure that the piston boot is in position to prevent damaging it when pivoting the
