honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Brake Caliper|Front|Page 6024 > < Technician Safety Information|Page 6021
Page 1
background image

Brake Caliper: Service and Repair
Front

Type 5410

Front Brake Calipers

NOTE:  There are two types of front brake calipers:
The caliper types can be identified by the "5410" or "2056" stamped on the caliper body as shown. Check the type of the brake caliper before servicing.

WARNING: 

-

Never use an air hose or dry brush to clean brake assemblies.

-

Use an OSHA approved vacuum cleaner to avoid breathing brake dust.

CAUTION: 

-

Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.

-

To prevent spills, cover the hose joints with rags or shop towels.

-

Clean all parts in brake fluid and air dry; blow out all passages with compressed air.

1. Remove the banjo bolt, and disconnect the brake hose from the caliper.
2. Remove the caliper bolts, then remove the caliper from the bracket.

3. Remove the caliper pins and pin boots from the caliper bracket.

Brake Caliper|Front|Page 6024 > < Technician Safety Information|Page 6021