Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
4. If necessary, apply compressed air to the caliper fluid inlet to get the piston out. Place a shop rag or wooden block as shown to cushion the piston
when it is expelled. Use low pressure air in short spurts.
WARNING:
-
Do not place your fingers in front of the piston.
-
Do not use high air pressure; use an OSHA approved 30 PSI nozzle.
5. Remove the piston from the caliper, and check the piston for scoring.
6. Remove the boot clip, piston boot and piston seal.
CAUTION: Take care not to damage the cylinder bore.
Type 2056
Front Brake Calipers
NOTE: There are two types of front brake calipers:
The caliper types can be identified by the "5410" or "2056" stamped on the caliper body as shown. Check the type of the brake caliper before servicing.
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Use an OSHA approved vacuum cleaner to avoid breathing brake dust.
CAUTION:
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
-
Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
