Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
3. Apply the recommended seal grease in the caliper seal set to the sealing lips and inside of a new piston boot, and secure install it in the caliper with
a new boot clip.
CAUTION: Be careful not to damage the caliper cylinder wall.
4. Lubricate the caliper and piston with brake fluid, then install the piston in the cylinder with the dished end facing in.
5. Apply the recommended seal grease in the caliper seal set to the sliding surface of sleeve B and the inside of the new pin and sleeve boots.
6. Install the new sleeve and pin boots and sleeve B on the caliper.
NOTE: Be sure to install the boots into the grooves in the caliper and sleeve B properly.
7. Apply the recommended seal grease in the caliper seal set to the sliding surface of sleeve A and the inside of a new guide pin boot.
8. Install the guide pin boot into the groove in the sleeve A.
