honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Actuator Test|Page 8350 > < Actuator Test
Page 2
background image

8. If you replace the solenoid valve assembly, be sure to use new O-rings on each solenoid.
9. Disconnect power and ground from the 4P connector. Disconnect the vent hose from the actuator. Connect a vacuum pump to the actuator vent

hose port, and apply vacuum. The actuator rod should pull in completely. If not, the vacuum valve is stuck open. Replace the actuator.

Actuator Test|Page 8350 > < Actuator Test