honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Main Switch Test/Replacement|Page 8369 > < Main Switch Test/Replacement
Page 1
background image

Cruise Control Switch: Service and Repair
Set/Resume Switch Test/Replacement

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons. ('99 - 00 models).
2. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least three minutes.
3. Disconnect the driver's airbag connector.
4. Remove the dashboard driver's lower cover.

5. Disconnect the cable reel sub-harness 3P connector from the main wire harness.

6. Check for continuity between the terminals of the cable reel sub-harness 3P connector in each switch position according to the table.

-

If there is continuity, and it matches the table, the switch is OK.

-

If there is no continuity in one or both positions, go to step 7.

Main Switch Test/Replacement|Page 8369 > < Main Switch Test/Replacement