honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Service Tips|Page 1857 > < Service Tips
Page 1
background image

Rocker Arm Assembly: Service and Repair
Removal

REMOVAL

1. Loosen the adjusting screws.

2. Unscrew the camshaft holder bolts, then remove the rocker arm assembly.

NOTE:
-

Unscrew the camshaft holder bolts two turns at a time, in a crisscross pattern, to prevent damaging the valves or rocker arm assembly.

-

When removing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the camshaft holders, the springs and
the rocker arms on the shaft.

Camshaft Holder Bolts Loosening Sequence:

Service Tips|Page 1857 > < Service Tips