honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Timing Belt|Removal and Installation|Page 1397 > < Timing Belt|Removal and Installation
Page 2
background image

6. Remove the upper bracket.

NOTE:
-

Use a jack to support the engine before the upper bracket is removed.

-

Make sure to place a cushion between the oil pan and the jack.

7. Remove the crankshaft pulley.

8. Remove the lower cover and dipstick tube.

NOTE: Do not use the lower cover to store removed items.

9. Remove the CKF sensor from the oil pump.

10. Loosen the adjusting bolt 180°. Push the tensioner to remove tension from the timing belt, then retighten the adjusting bolt.
11. Remove the timing belt.

Timing Belt|Removal and Installation|Page 1397 > < Timing Belt|Removal and Installation