Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
Timing Belt: Adjustments
TENSION ADJUSTMENT
CAUTION: Always adjust the timing belt tension with the engine cold.
NOTE:
-
The tensioner is spring-loaded to apply tension to the belt automatically after making the following adjustment.
-
Always rotate the crankshaft counterclockwise when viewed from the pulley side. Rotating it clockwise may result in improper adjustment of the
belt tension.
-
Inspect the timing belt before adjusting the belt tension.
1. Remove the cylinder head cover.
2. Remove the upper cover.
3. Rotate the crankshaft five or six revolutions to set the belt.
4. Set the No. 1 piston at TDC.
5. Loosen the adjusting bolt 180°.
6. Rotate the crankshaft counterclockwise three teeth on the camshaft pulley.
7. Tighten the adjusting bolt.
8. After inspecting, retorque the crankshaft pulley bolt.
