Honda Workshop Service and Repair Manuals > Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999) > Powertrain Management | Transmission Control Systems | Actuators and Solenoids - Transmission and Drivetrain | Actuators and Solenoids - A/T | Shift Control Solenoid Valves <--> [Shift Solenoid, A/T] | Component Information | Technical Service Bulletins | Customer Interest for Shift Control Solenoid Valves: | 00-012 | Jun | 01 | A/T - Harsh Shifts/Stays in 1st Gear/MIL ON/DTC's Set

Page 3

12.

Disconnect the linear solenoid electrical connector. Remove the mounting bolts, then remove the linear solenoid.

13.

Inspect the linear solenoid mounting surface on the transmission. Remove any contamination.

14.

Install the new linear solenoid. Reconnect the electrical connector.

15.

Use the PGM Tester to erase any DTCs in the powertrain control module (PCM).

*16. Test-drive the vehicle to check the shift feel. If it still shifts harshly, install a remanufactured transmission.*

DISCLAIMER