Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
16. Install the steering wheel nut, and connect the horn connector to the steering wheel. Then install the driver's airbag.
17. Attach the cable reel 2P and 3P connector to the connector holder. Then install the driver's dashboard lower cover.
18. Reconnect the driver's airbag 2P connector to the cable reel 2P connector and reinstall the access panel on the steering wheel.
19. Reconnect the battery positive cable, then the negative cable.
20. After installing the cable reel, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Make sure the headlight and wiper switches work.
-
Go for a test drive, and make sure the cruise control switches work.
