honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Starting System - Unable To Key In Ignition Switch|Page 6233 > < Starting System - Unable To Key In Ignition Switch
Page 1
background image

Ignition Lock: Testing and Inspection

1. Remove the driver's dashboard lower cover and knee bolster.

2. Disconnect the 7P connector from the main wire harness.

3. Check for continuity between the terminals in each key position according to the table.
4. Check that the key cannot be removed with power and ground connected to the No.7 and No.6 terminals.

-

If the key cannot be removed, the key interlock solenoid is OK.

-

If the key can be removed, replace the steering lock assembly (the interlock solenoid is not available separately).

Starting System - Unable To Key In Ignition Switch|Page 6233 > < Starting System - Unable To Key In Ignition Switch