honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Starter Inspection|Page 6250 > < Starter Inspection|Page 6248
Page 3
background image

1. Check the hold-in coil for continuity between the S terminal and the armature housing (ground). The coil is OK if there is continuity.
2. Check the pull-in coil for continuity between the S and M terminals. The coil is OK if there is continuity.

Armature Inspection and Test

Armature Inspection

1. Inspect the armature for wear or damage due to contact with the permanent magnet or field winding.

-

If there is wear or damage, replace the armature.

Starter Inspection|Page 6250 > < Starter Inspection|Page 6248