honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Suspension - Rear Suspension Clunk/Squeak On Bumps|Page 6844 > < Suspension - Rear Suspension Clunk/Squeak On Bumps
Page 2
background image

Skill Level:

Repair Technician

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

*NOTE:

ISIS online service manual information is only available for vehicles 1990 and newer.

1.

Remove the rear trailing arm:

^

Refer to the suspension section of the appropriate service manual, or

^

Online, enter keyword REAR SUSPENSION, then select Suspension Arms Replacement from the list.*

2.

Mark the trailing arm at the arrow on the bottom of the bushing.

3.

Place the arm on a hydraulic press, supported by the hub base, with the spindle facing up.

4.

With the hub driver, press the old bushing out of the trailing arm.

Suspension - Rear Suspension Clunk/Squeak On Bumps|Page 6844 > < Suspension - Rear Suspension Clunk/Squeak On Bumps